EV Charger InstallationClearwater, FL

EV charger installation in Tampa Bay starts with your panel. If the panel has capacity for a 40–50-amp dedicated circuit, the job is straightforward: run the circuit, mount the charger, test it with your vehicle. If the panel is full or undersized, that's a separate conversation about a panel upgrade first.

A Level 2 charger (240V, 40–50 amp) adds 25–30 miles of range per hour. A standard 120V outlet adds 3–4 miles per hour. If you drive 30–40 miles a day — most people in Tampa Bay do — a Level 2 charger means waking up to a full charge every morning. A standard outlet means watching your battery slowly decline over the week.

Labor and materials for a standard garage installation run $400–$1,500. That's the circuit, conduit, mounting, and testing — charger unit not included. A long conduit run (100 feet vs. 20 feet) adds $300–$500. If you have a detached garage with no existing electrical service, that's an $800–$1,500 subpanel job before the charger circuit. All-in with the charger unit, most installs land at $1,400–$2,200.

The Tesla Wall Connector is a good unit. It costs $420–$550 and requires a 60-amp breaker for full output. A Grizzl-E or Emporia does the same charging, often for a little less. That's worth knowing before you order.

We install any NEMA 14-50 or hardwired Level 2 charger. You supply the unit or we source one. We pull the permit — required in Florida for any new 240V circuit. The $89 diagnostic confirms panel capacity before any work is scheduled.

We serve Clearwater and the surrounding Pinellas County area. Call (727) 222-9892 for same-day service.